Lg Electronics 55SH7DB ユーザーズマニュアル

5

For wired network connections, connect the 
display to a local area network (LAN) via the LAN 
port as shown on the following diagram. Then, set 
up the network settings. For wireless network con-
nections, connect the Wi-Fi USB module to the USB 
port. Then, set up the network settings.
After making a physical connection, a small 
number of home networks may require the display 
network settings to be adjusted. For most home 
networks, the display will connect to automatically 
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.

To set up the network settings: (Even if your display 
has already connected automatically, running 
setup again will not harm anything),

1

 

Press SETTINGS to access the main menus.

2

  Press the navigation buttons to scroll to NET-

WORK and press OK.

3

  Press the navigation buttons to select Net-

work Setting and press OK.

4

  If you already set network setting, select 

Resetting. The new connection settings resets 
the current network settings. 

5

 Select 

IP Auto Setting or IP Manual Setting.

-  IP Manual Setting  

press the navigation and number buttons. IP 
addresses will need to be input manually.

-  IP Auto Setting  

Select this if there is a DHCP server (Router) 
on the local area network (LAN) via wired 
connection, the display will automatically 
be allocated an IP address. If you’re using a 
broadband router or broadband modem that 
has a DHCP (Dynamic Host Configuration 
Protocol) server function. The IP address will 
automatically be determined.

6

  When you are finished, press EXIT.

LAN

Router

LAN

WAN

Cable modem

ETHERNET

Internet

 •

Do not connect a modular phone cable to the 
LAN port.

 •

Since there are various connection methods, 
please follow the specifications of your 
telecommunication carrier or internet service 
provider.