Canon SX7 取り扱いマニュアル
112
SE
TTING
TTING
UP FU
NCTIO
N
S FROM MEN
U
S
Setting up the Digital Video Input Signal
[Digital video]
You can select the standard of the digital video
input signal.
input signal.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
the [MENU] button.
Setting a Password
[Password settings]
You can set a password to the projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
Once you set the password, you will need to
enter the password each time you turn on the
projector.
T
T
T
Press the [OK] button to confirm, and then press
the [MENU] button.
the [MENU] button.
System settings
Other settings
Digital video
Projects a full range digital signal.
Projects a limited range digital sig-
nal.
nal.
z Refer to the User's Manual that came
with the AV equipment for more
detailed information on settings.
detailed information on settings.
DIGITAL VIDEO
F
L
System settings
Other settings
Password settings
Disables the password protection.
Enable the password protection.
z Once you set a password, the pass-
word entry screen appears at power-
on. Enter a 4-digit password with [ ],
[ ], [<], and [>]. If the password is
valid, projection starts. If you enter a
wrong password three times, the pro-
jector will be turned off.
on. Enter a 4-digit password with [ ],
[ ], [<], and [>]. If the password is
valid, projection starts. If you enter a
wrong password three times, the pro-
jector will be turned off.
z To cancel the password, remove the
power plug from the AC outlet after
the projection, and then insert the
power plug while holding down the
[MENU] button until the projector
beeps.
the projection, and then insert the
power plug while holding down the
[MENU] button until the projector
beeps.
DIGITAL PC
ANALOG PC
DIGITAL VIDEO
COMP./SCART
VIDEO/S-VIDEO
Off
On
<
<