Canon WUX450 ユーザーズマニュアル

27

Sa
fe

ty

 In

str

uc

tions

When handling the lamp, pay attention to the following points.

• Be sure not to handle the lamp immediately after it has been used. Be sure 

to switch off the power and wait for approximately 1 hour for the lamp and 
the projector to cool down sufficiently. Failure to do so could result in a burn 
or personal injury due to heat from the lamp or projector.

• When an instruction to replace the lamp has been displayed (LAMP Indicator 

Displays (

)), the possibility of the lamp breaking will increase. Replace 

the lamp with a new one as soon as possible.

• When disposing of a used mercury lamp, dispose of it in the same way as a 

fluorescent lamp and in accordance with the local regulations where you live.

Pay attention to the following points regarding handling of batteries. Failing to do so 
could result in a fire or personal injury.

• Do not heat, short circuit or disassemble the batteries, or place them in a fire.
• Do not attempt to recharge the batteries that are included with the remote 

control.

• Remove the batteries when they are flat or when the remote control will not 

be used for a long period of time.

• When replacing the batteries, replace both at the same time. Also, do not 

use two batteries of a different type at the same time.

• Insert the batteries with the + and - terminals in the correct directions.
• If any liquid from inside the batteries leaks out and contacts your skin, be 

sure to wash the liquid off thoroughly.