3M MP8750 ユーザーズマニュアル



 3M 1999

3M



 Multimedia Projector MP8750

3

The MP8750 projector has terminal connections on the backside of the projector. Refer to Section 3.4-Cable Connections for
more detail.

1. AUX: Only compatible with 3M devices.
2. SVHS/AUDIO IN: SVHS and audio input.
3. VIDEO1/AUDIO IN: Video1 and audio input.
4. VIDEO2/AUDIO IN: Video2 and audio input.
5. RS-232C: Mouse emulation/external projector control.
6. MONITOR: Output to external monitor.
7. PC/RGB1: Video input #1 from computer.
8. PC/RGB2: Video input #2 from computer.
9. AUDIO IN2: Audio L/R input from computer #2
10. AUDIO IN1: Audio L/R input from computer #1.
11. AUDIO OUT: Audio L/R output to external audio system.

The MP8750 operator touch panel keypad (Figure 3-2) is located on top of the projector.  Refer to Section 4 for more detail
on using the keypad.

1. Zoom: Adjust (increase/decrease) image size.
2. Video: Select Video1, Video2 or S-VHS input
3. PC: Select PC/RGB 1/2 input.
4. Enter: Initiate drop windows, toggle check box

(on/off), display Info sub-menu or press and hold
then use Disc Pad to reposition menu location.

5. Volume (+/-): Adjust (increase/decrease) audio level.
6. Mute: Toggle speakers on/off.
7. Brightness (+/-): Adjust image brightness.  (See

Menu.)

8. Disc/Pad: Move cursor up/down, left/right.
9. Menu: Display/remove menus.

Menu (+/-): Increase/decrease menu value.

10. Aux: Toggle On/Off a 3M compatible device.
11. Focus: Adjust image focus.
12. Standby: Switch between standby mode (lamp off,

fan off after cool down) and projection mode (lamp
on, fan on).