Sanyo PLC-XU350K ユーザーズマニュアル
7
Choose Computer 1(RGB) or Computer 1(RGB(Scart)) by pressing the INPUT button on the top control or
press the COMPUTER 1 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
press the COMPUTER 1 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
1
Input Menu
3
Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )
Computer Input
COMPUTER 1 button
✔
Note:
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.45).
automatically (p.45).
Computer
1
Top Control
Remote Control
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point
Menu. Use the Point
ed
buttons to select Input and
then press the Point
8
or the SELECT button.
Use the Point
ed
buttons to select Computer 1.
When Computer 1 is selected, press the Point
8
to
access the submenu items. Use the Point
ed
buttons
to select the RGB input source and then press the
SELECT button.
SELECT button.
Computer 1(RGB)
Computer 1
(RGB(Scart))
Video
Computer (RGB)
S-video
INPUT button
Computer 1(RGB) /
(Component) / (RGB(Scart))