Sanyo PLC-XU350K ユーザーズマニュアル

Auto PC Adjustment function is provided to automatically adjust Fine sync ., Total dots, Horizontal , Vertical ,
Clamp, Display area H and Display area V positions to conform to your computer.

To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can
be stored in the projector. Once the parameters are stored,
the  setting  can  be  done  just  by  selecting  a  Mode  (1–5)  in
the  PC  System  Menu  (see  page  29).  See  also  “Store”  on
page 32.

✔ 

 • Fine  sync .,  Total  dots,  Horizontal  and  Vertical

position  of  some  computers  cannot  be  fully  adjusted
with the Auto PC Adjustment function. When the image
is  not  provided  properly  with  this  operation,  manual
adjustments are required (pp.31-32).

 • The Auto PC Adjustment cannot be operated when 480i,

575i,  480p,  575p,  70p,1035i,  or  1080i  is  selected  in
the PC System Menu (p.29).

Press the MENU button to display the On-Screen
Menu. Use the Point

ed

buttons to select PC Adjust

and then press the Point

8

button.

Use the Point

ed

buttons to select Auto PC Adj . and

then press the SELECT button.

Use Point ed

buttons

to select  Auto PC 

Adj . and press the SELECT button.
Please wait . . . appears while the Auto PC
adjustment is in process.