Sanyo PLC-XU350K ユーザーズマニュアル

This projector has the picture screen resize function, which
enables you to customize the image size.

Provide the image to fit the screen size.

True
Provide  the  image  in  its  original  size.  When  the  original
image size is larger or smaller than the screen size (1024 x
768), the projector enters to the panning mode automatically.
Use the Point

ed

7 8 

buttons to pan the image if it's larger

than  the  screen  size.  When  adjusted,  the  arrows  will  turn
red.  When  reached  to  the  correction  limits,  the  arrows  will
disappear.

Full 
Provide the full screen image.

✔ 

 • The Screen Menu, except for Normal and Custom, cannot be operated when 70p(HDTV), 1035i (HDTV),

or 1080i (HDTV) is selected in the PC System Menu (p.29).

 • This projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is

higher than it, reset the resolution to the lower before connecting to the projector.

 • The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.
 • True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC

System Menu (p.29).

To  store  the  adjusted  data,  select  Store  and  press  the
SELECT  button.  Use  the  Point

ed

 buttons  to  select  one

from Image 1 to 4 and press the SELECT button.
A  confirmation  box  appears  and  then  select  yes.  Stored
data  can  be  called  up  by  selecting  an  Image  (1–4)  in  the
Image Mode Selection on page 33.

wide
Provide the image to fit the wide video aspect ratio (16:9) by
expanding  the  image  width  uniformly.  This  function  can  be
used for providing a squeezed video signal at 16:9.

Press the MENU button to display the On-Screen
Menu. Use the Point

ed

buttons to select Screen and

then press the Point

8 or the SELECT

button.

Use the Point

ed

buttons select the desired item and

then press the SELECT button .

A confirmation box appears and
then select yes .