Sanyo PLC-XW200K ユーザーズマニュアル

This projector uses nominal input voltages of 100-120 V or

200–240 V AC and it automatically selects the correct input

voltage.  It  is  designed  to  work  with  single-phase  power

systems  having  a  grounded  neutral  conductor.  To  reduce

the risk of electrical shock, do not plug into any other type of

power system.

If  you  are  not  sure  of  the  type  of  power  being  supplied,

consult your authorized dealer or service station.

Connect  the  projector  with  all  peripheral  equipment  before

turning the projector on.



:

Unplug the AC power cord when the projector is not

in use. When this projector is connected to an outlet

with the AC power cord, it is in Stand-by mode and

consumes a little electric power.

To the AC outlet.
(200 - 240 V AC)

AC power cord must meet requirement of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If supplied AC power cord does not match your AC outlet, contact your sales dealer.

To power cord

connector on your

projector.

Ground

To the AC outlet.
(120 V AC)

To the AC outlet.
(200 - 240 V AC)

 

The AC outlet must be near this equipment and must be

easily accessible.

Connect  the AC  power  cord  (supplied)  to  the

projector.