Sanyo PLC-XW200K ユーザーズマニュアル

Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1

button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described

below.

Use the Point

▲▼

buttons to select Computer 1 and

then press the Point

►

button.

When the input source is coming from video

equipment connected to the COMPUTER

IN 1/S-VIDEO IN/COMPONENT IN terminal

with a Component-VGA Cable, select
Component

.

When the input source is coming from video

equipment connected to the COMPUTER

IN 1/S-VIDEO IN/COMPONENT IN terminal

with a Scart-VGA Cable, select RGB 
(Scart)

.

Press the MENU button to display the On-Screen

Menu. Use the Point

▲▼

buttons to select Input and

then press the Point

►

or the SELECT button.

Note:

   When the Input Search function is set to On1 or On2,

the input signal will be searched automatically (p.44).

Use the Point

▲▼

buttons to select Component or

and then press the SELECT button.