Vidikron 30ET ユーザーズマニュアル
22
Vidikron Vision 30 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
3.6
Connections to the Vision
30
Connections to the Vision
30
Proceed as follows to connect the Vision 30 to your video sources, external controller(s) – if
present – and AC power.
present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on connectors
that have them.
Connector Panel Access
To access the connector panel, press
the door release button so it pops out.
Turn the knob clockwise or
counter-clockwise and pull gently on it
to open the door.
the door release button so it pops out.
Turn the knob clockwise or
counter-clockwise and pull gently on it
to open the door.
Connecting Source
Components to the Vision 30
Connect your video sources to the Vision 30 as shown and described in the sections that
follow.
follow.
HDMI/DVI Connections: See Figure 3-5. With an HDMI source, use the included
HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable.
HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable.
Figure 3-5. HDMI/DVI Source Connections
➤
➤
Use the HDMI input whenever possible. This ensures the highest video
quality because the signal is carried in the digital domain throughout the
entire signal path, from source component output into the projector.
quality because the signal is carried in the digital domain throughout the
entire signal path, from source component output into the projector.
Tip
HDMI or DVI Source
(DVD Player or HD Set Top Box)