Vidikron VERSION 50 ユーザーズマニュアル
29
Vidikron Vision Model 50 Owner’s Operating Manual
Basic Operation
•
Press ZOOM and the arrow buttons (
◄/►)
to adjust the projected image size.
•
Press FOCUS and the arrow buttons (
◄/►)
to focus the image.
•
Press LENS SHIFT and the arrow buttons
(
(
▲/▼) to adjust the lens vertically.
Adjusting the Zoom,
Focus and Lens Shift
Focus and Lens Shift
Adjusting Projector
Height or Projection
Angle
Height or Projection
Angle
L-BOX
I-WIDE
CINEMA
C-FILL
MEM1
ISF
NT
ISF
DAY
DEF
ON
OFF
COMP 1
COMP 2
S-VID
VIDEO
RGB HD
HDMI
ANA
4X3
Turning on the Power
•
Turn on the main power switch on the rear
of the projector. The POWER LED will light
orange.
of the projector. The POWER LED will light
orange.
•
Press the ON button on the remote control
to turn on the projector. The POWER LED
flashes orange during the warm up period,
then lights solid green.
to turn on the projector. The POWER LED
flashes orange during the warm up period,
then lights solid green.
•
“Searching….” appears on the screen before
the projector identifies the input signal,
and remains there until a valid signal is
detected.
the projector identifies the input signal,
and remains there until a valid signal is
detected.
•
If an incompatible input signal exceeds
the range of the projector, a “No signal
supported” message appears on the screen.
This message remains on the screen until
you change the input signal.
the range of the projector, a “No signal
supported” message appears on the screen.
This message remains on the screen until
you change the input signal.
•
To adjust the projector height or projection
angle, or to compensate for a mounting
surface that isn’t level, turn the four
adjustable feet on the bottom of the
projector.
angle, or to compensate for a mounting
surface that isn’t level, turn the four
adjustable feet on the bottom of the
projector.