Toshiba 250 ユーザーズマニュアル
21
Installation and
connections
Projector placement angle adjustment (Foot adjuster)
Foot adjuster
release button
release button
Foot adjuster
The tilt of the projector can be adjusted using the foot adjuster. Adjust this when the highest position by the lens shift dial
is
insufficient. Refer to “Projection on the screen”
, and adjust the foot adjuster after projecting a picture.
Lift the front of the projector until the desired tilt
angle is obtained and hold down the foot adjuster
release button.
angle is obtained and hold down the foot adjuster
release button.
The foot adjuster will extend.
Release the button to lock in position.
Release the button to lock in position.
1
Turn the foot adjuster to make fine adjustment to
the height.
the height.
Turn clockwise to lift up.
Turn counterclockwise to lower.
Turn counterclockwise to lower.
2
Notes
• To put the foot adjuster back, hold down the foot adjuster release button and lower the front slowly.
• Be sure to hold the projector when putting the foot adjuster back so as not to let the front fall on your fingers.
• Do not tilt the projector at an angle exceeding the range adjustable by the foot adjusters, since the life duration of the lamp may be shortened.
• Be sure to hold the projector when putting the foot adjuster back so as not to let the front fall on your fingers.
• Do not tilt the projector at an angle exceeding the range adjustable by the foot adjusters, since the life duration of the lamp may be shortened.
Lift up
Lower