Vidikron Vision 110 ユーザーズマニュアル

Figure 2-3 shows the rear connector panel on the Vision 110, and the paragraphs that follow 
describe them.

1.

 

Five BNCs for connecting either RGB or component high-definition sources (up to 
1080p). The Vision 110 automatically detects the input signal resolution.

2.

 

Five RCA-type connectors for either RGB or component high-definition sources (up to 
1080p). The Vision 110 automatically detects the input signal resolution. 

 

3.

 

For future use. 

4.

 

Wired input from an external remote control or infrared receiver. It is a 3.5-mm, mini 
phono jack, wired as follows:

 

Ring = +5V

 

Tip = IR Input (TTL level)

 

Sleeve = Ground

 

5.

 

A male, 9-pin D-sub connector for interfacing with a PC or home theater 
automation/control system. (Currently, only RS-232 interface is supported.) 

6.

 

Connection for up to three (3), 12-volt trigger-controlled devices. These can be 
retractable screens, screen masks or the Vidikron CineWide with AutoScope system.

WIRED REMOTE

WIRED REMOTE

HD3 (VGA / Y-Pb-Pr)

HD3 (VGA / Y

-Pb-Pr)

Service port.

Not for user

access

10

9

8

7

6

5

4

3

2

1