Vidikron Vision 110 ユーザーズマニュアル

Remove Projector Front Feet: Place the 
projector upside down on a blanket or 
other soft surface. Loosen and remove the 
two front feet on the projector.

 

 

 

 

 

 

 

 

 

 

 

 

Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, the adapters 
bring the attachment points for the projector mounting rails (included with the projector 
ceiling mount kit) from the bottom of the projector up and around the AutoScope lens motor 
housing. For floor installations (where the projector is upright), the adapters allow the 
projector to lie flat on the mounting surface.

Using six (6) each of the supplied, M6 x 12mm Pan-Head Phillips screws (item #2), attach the 
AutoScope Ceiling Mount Adapters/Projector Stands (items #3 and #4) to the projector as 
shown in Figure 3-7.