Vidikron Vision 110 ユーザーズマニュアル

To access the motorized lens controls, use the FOCUS, ZOOM and LENS buttons on the Vision 
110 remote control unit (described on page 12). 

Alternatively, select Display Device from the Service Menu. Select Configure, then Lens from 
the Display Device menu. The Lens menu gives you a great deal of control over the picture 
size, position and focus: 

To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then, press 
and hold the ENTER button on the remote control.

To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign 
(-). Then, press and hold the ENTER button on the remote control.

To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+). Then, 
press and hold the ENTER button on the remote control.

To change the projected image position, use the cursor buttons to highlight “Left,” “Right,” 
“Up” or “Down” in the Lens menu. Then, press and hold the ENTER button to shift the image 
in that direction.

➤

➤

➤