Vidikron Vision 110 ユーザーズマニュアル

Use the controls in the Picture Menu to calibrate your Vision 110 for optimum picture quality.

The Vision 110 has been designed to incorporate setup and calibration standards established 
by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, 
industry-recognized standards for optimal video performance and has implemented a 
training program for technicians and installers to use these standards to obtain optimal 
picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that 
setup and calibration be performed by an ISF certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each input 
separately. 

Cinema

CINEMA

Select Cinema to view 2.35 source 
material in its native aspect ratio.

With a 16:9 screen and a 
non-CineWide projector (no 
anamorphic lens), the upper and 
lower portions of the screen are 
masked, but the geometry of the 
active image area is unchanged.

 

 

With a 2.35:1 screen and a 
CineWide-equipped projector, 
the Vision 110 scales the 2.35:1 
image so that the active image 
area fills the 16:9 chip surface, 
eliminating the black bars. The 
secondary, anamorphic lens then 
restores the proper geometry to 
the 2.35:1 image. 

IntelliWide 2.35

IWIDE

2.35

A 16:9 image is scaled 
NON-linearly (more on the sides 
than in the center) to fit a 2.35:1 
screen. 

IntelliWide 2.35 is available only 
on the Vision 110/CineWide.

2.35:1 Image on

16:9 Screen

(Cinema aspect ratio / no CineWide)

2.35:1 Image on

2.35:1 Screen

(Cinema aspect ratio / CineWide)

16:9 Image on

2.35:1 Screen with

Intelliwide 2.35

16:9 Image on

2.35:1 Screen

16:9 Image on

2.35:1 Screen