Vidikron SERIES 1080p ユーザーズマニュアル

• Press the MEM1 button on the remote control to 

recall settings for the current input from the 
“Custom 1” memory preset. 

• Press ISF NT (Night) to recall settings for the current input from the “ISF Night” memory 

preset. 

• Press ISF DAY to recall settings for the current input from the “ISF Day” memory preset. 

• Press DEF to recall the factory-default settings for the current input. An on-screen 

confirmation message appears. Press DEF again to confirm. 

Use these buttons to select the appropriate aspect 
ratio for the type of program material being viewed. 
For more information on aspect ratios, refer to Table 
4-1. 

When you turn on the Vision 70, it switches to the 
last selected input and looks for a valid signal. 

Use these buttons on the remote control to select 
an input source directly. 

 

For PIP and PBP purposes, there are two groups of 
inputs separated by their display modes: 

• Video (SD) group: Video, S-Video and 

Component 1 inputs. 

• Graphic (HD) group:  HDMI and 

Component 2/RGB inputs. 

PIP and PBP show one input from the Graphic group within or beside one input from the 
Video group respectively. 

• Press PBP to enable the PBP function. Press PBP again to switch the screens left to right. 

Press PBP again to turn PBP off. 

• Press ACTIVE to switch to the active window. (You can only switch inputs in the active 

window.) 

• Press PIP to enable the PIP function. Press PIP again to switch the main window. Press PIP 

again to turn PIP off. 

• To adjust the size of the PIP window, press PIP+ or PIP-. 

• Adjust the position of the PIP window with the arrow buttons ( 

 ). 

4