Viewsonic A-CD-PJ502 ユーザーガイド
ViewSonic PJ502
10
Connecting your devices
NOTE . Whenever attempting to connect a laptop computer to the projector, be sure
to acti-
vate the laptop's RGB external image output (set the laptop to CRT display or to
simulta-
neous LCD and CRT display). For details on how this is done, please refer to
the instruction
manual of the corresponding laptop computer.
o Secure the screws on the connectors and tighten.
o Some computers may have multiple display screen modes. Use of some of these
o Secure the screws on the connectors and tighten.
o Some computers may have multiple display screen modes. Use of some of these
modes
will not be possible with this projector.
o For some RGB input modes, the optional Mac adapter is necessary.
o When the image resolution is changed on a computer, depending on an input,
o For some RGB input modes, the optional Mac adapter is necessary.
o When the image resolution is changed on a computer, depending on an input,
automatic
adjust function may take some time and may not be completed. In this
case, you may not be
able to see a check box to select “Yes/No” for the new
resolution on Windows. Then the res-
olution will go back to the original. It might be
recommended to use other CRT or TFT mon-
itors to change the resolution.
About Plug-and-Play capability
Plug-and-Play is a system composed of the computer, its operating system and
About Plug-and-Play capability
Plug-and-Play is a system composed of the computer, its operating system and
peripheral
equipment (i.e. display devices). This projector is compatible with VESA
DDC 2B. Plug-and-
Play can be achieved by connecting this projector to computers
that are VESA DDC (display
data channel) compatible.
o Please take advantage of this function by connecting the accessory RGB cable to
o Please take advantage of this function by connecting the accessory RGB cable to
the RGB
port (DDC 2B compatible). Plug-and-Play may not work properly if any other
type of connec-
tion is attempted.
o Please use the standard drivers in your computer as this projector is a Plug-and-Play mon-
itor.
o Please use the standard drivers in your computer as this projector is a Plug-and-Play mon-
itor.
CAUTION
X
Turn off all devices prior to connecting them to the projector. Attempting to connect
a
live device to the projector may generate extremely loud noises or other
abnormalities
that may result in malfunction and/or damage to the device and/or
projector.
X
Use the accessory cable or a designated-type cable for the connection. Some
cables
have to be used with core set. A cable that is too long may cause a certain
picture deg-
radation. Please consult with your dealer for details. For cables that have
a core only at
one end, connect the core to the projector.
X
Make sure that you connect devices to the correct port. Incorrect connection may
result
in malfunction and/or damage to the device and/or projector.