Viewsonic A-CD-PJ502 ユーザーガイド

2. Use the menu cursor buttons 

S

/

T

 to adjust the zoom level.

To move the zoom area, press the POSITION button in the MAGNIFY mode, the use the 
menu cursor buttons 

S

/

T

/

W

/

X

 to move the area. And to finalize the zoom area, press the 

POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF button of 
MAGNIFY on the remote control.

*  The projector automatically exits the MAGNIFY mode when the input signal changes, or 

when an operation of changing the display condition (automatic adjustment, etc.) is exe-
cuted.

*  Although in the MAGNIFY mode, the keystone distortion condition may vary, it will be re-

stored when the projector exit the MAGNIFY mode.

1 Press the FREEZE button on the remote control.

The “FREEZE” indication will appear on the screen, and the projector will enter the 
FREEZE mode.
To exit the FREEZE mode and restore the screen to normal, press the FREEZE button 
again.

* The projector automatically exits the FREEZE mode when the input signal changes, or 

when one of the projector’s buttons or the remote control buttons of STANDBY/ON, 
SEARCH, RGB, VIDEO, BLANK, AUTO, VOLUME, MUTE, POSITION and MENU is 
pressed.

* If the projector continues projecting a still image for long time, the LCD panel might pos-

sibly be printed. Do not leave the projector in FREEZE mode for too long.

1. Press the BLANK button on the remote control.

The blank screen (refer to the item BLANK of section SCREEN menu) will be displayed 
instead of the screen of input signal.
To remove the blank screen and return to the input signal screen, press the BLANK but-
ton again.

* The projector automatically returns to the input signal screen when the input signal 

changes, or when one of the projector’s buttons or the remote control buttons of STAND-
BY/ON, SEARCH, RGB, VIDEO, FREEZE, AUTO, VOLUME, MUTE, POSITION and 
MENU is pressed.