Viewsonic A-CD-PJ502 ユーザーガイド

MyScreen

This item functions for capturing the MyScreen of the blank screen and the start 

up screen. Please execute displaying the input including the picture you want to 

capture.
1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start 

capturing the picture from the current screen.
Please wait for the target picture to be displayed, and press the ENTER button 

on the remote control when the picture is display. The picture will freeze and 

the frame for capturing appears.
To stop performing, press the RESET or ESC button on the remote control.

2. Using the buttons 

W

/

X

/

S

/

T

 adjust the frame position. Please move the frame 

to the position of the picture which you want to use.
To start registration, press the ENTER button on the remote control.
To restore the screen and return to the previous dialog, press the RESET or 

ESC button on the remote control.

Registration takes about two minutes. When the registration is completed, the reg-

istered screen and the message “MyScreen registration is finished.” are displayed 

for several seconds.
If the registration failed, the message “A capturing error has occurred. Please try 

again.” is displayed.

MyScreen 

Lock

Using the buttons 

S

/

T

 turns on/off the MyScreen lock function.

TURN ON 

 

TURN OFF

When the TURN ON is selected, the item MyScreen cannot be performed. Use 

this function for protecting the current MyScreen.

MESSAGE

Using the buttons 

S

/

T

 turns on/off the message function.

TURN ON 

 

TURN OFF

When the TURN ON is selected, the following message function works.

“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“Detecting....” while searching for the input
The indication of the input signal by changing
The indication of the aspect ration by changing