Viewsonic A-CD-PJ502 ユーザーガイド

ViewSonic PJ502

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique char-
acteristic of liquid crystal displays, and such do not constitute or imply a machine defect.

Phenomenon

Cases not involving a machine defect

Reference page

No pictures are

displayed.

The lens cover is closed.
Remove the lens cover.

Part name
Power on/off

The signal cables are not correctly connected.
Correctly connect the connection cables.

Connecting your devices

The brightness is adjusted to an extremely low

level.
Adjust the BRIGHT to a higher level using the

menu function or the remote control.

EASY MENU
PICTURE menu

Colors have a

faded-out

appearance, or
Color tone is

poor.

Color settings are not correctly adjusted.
Perform picture adjustments by changing the

COLOR TINT, COLOR TEMP and/or COLOR

SPACE settings, using the menu functions.

EASY MENU
PICTURE menu
INPUT menu

COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO,

RGB, SMPTE240, REC709 or REC601.

INPUT menu

Pictures appear

dark.

The brightness and/or contrast are adjusted to

an extremely low level.
Adjust the BRIGHT and/or CONTRAST settings to

a higher level using the menu function.

EASY MENU
PICTURE menu

The WHISPER function is working.
Select the NORMAL to the item WHISPER in the

SETUP menu.

EASY MENU
SETUP menu

The lamp is approaching the end of its product

lifetime.
Replace the lamp.

Lamp

Pictures appear

blurry.

Either the focus and/or horizontal phase set-

tings are not properly.
Adjust the focus using the focus ring, and/or H

PHASE using the menu function.

Adjusting the zoom and

focus IMAGE menu

The lens is dirty or misty.
Clean the lens by referring to the section “Other
care”.

Other care