Sony VPH-V20U ユーザーズマニュアル
Projecting
13
You can also use the buttons on the control panel with the same names as
those on the remote commander to operate the projector.
those on the remote commander to operate the projector.
1
Press down the MAIN POWER switch of the projector (O ON).
2
Turn on the power by pressing the 1/u (power on/standby) button.
3
Turn on the connected equipment.
4
Press the INPUT SELECT button to select the input signal to be
projected.
projected.
VIDEO: to select the signal input from the VIDEO IN VIDEO
connector
S VIDEO: to select the signal input from the VIDEO IN S VIDEO
connector
INPUT A: to select the signal input from the INPUT A connectors
To project the RGB or component signal, press the PAGE button
until the SYSTEM PRESET display appears. Press the
until the SYSTEM PRESET display appears. Press the
V or v
button to select INPUT A and select RGB or COMPONENT with
the
the
B or b button.
MUTING
INPUT SELECT
PIC
VIDEO
S VIDEO
INPUT A
TEST
R CENT
B CENT
PAGE
M SEL
ASPECT
RESET
1
4
2
Projecting
PIC MUTING button
ASPECT button