Sharp XR-20X ユーザーズマニュアル

This function advises you to solve the problems during usage.

• You can adjust the items with check marks (

✔).

• The items in the “Help” menu change, de-

pending on the input signal or setting that you
have selected.

• If the problem is not solved, refer to

• When selecting “sRGB” in "Picture Mode”, the

item “Color is faded or poor” is not displayed.
This means you cannot change input signal
types.

Press O or Q to adjust.

If the image is not improved, se-
lect  “Adjust horizontal noise.”,
then press hENTER.

Select “Initiate “Auto Sync” Ad-
justments”, then press hENTER.

Press  P or R to select “Vertical
stripes or flickering image ap-
pears” on Help menu, then press
hENTER.

Example: When image flickering appears

Operation to solve image flickering when pro-
jecting the computer RGB signal.

Picture

There is no picture or audio

SCR - ADJ

PRJ - ADJ

Help

Vertical stripes or flickering image appear

Data image is not centered

Color is faded or poor

Picture is dark

The image is distorted

Reset all adjustments to default settings

SEL.

ENTER

END

If there is no change after performing "Auto Sync"
adjustments, adjust the following items.

Initiate “Auto Sync” Adjustments.

Help

Vertical stripes or flickering image appear

Adjust vertical noise

Adjust horizontal noise

Reset the 2 items above

Return

Cur. sig. freq: H 43 kHz / V 60 Hz

SEL.

ENTER

END

Press BMENU/HELP.

Press O or Q to select “Help”, then
press hENTER.

Adjustment buttons
(P/R/O/Q)

ENTER button

MENU/HELP
button

0

Phase

SEL./ADJ.

Rtn. Menu

END

Help