Sharp PG D50X3D ユーザーズマニュアル

-29

Setting of Search Port 

(ADVANCED[0]Search Port)

Sets the port number used when searching 
for the projector from the network.

advanced>0
Please Enter Port Number for Search from Computer.
Valid range 

: 1025 to 65535

Search Port 

: 5006

Please Enter 

: 5004

(change)         —>    5004

1

2

*

1 Enter “0” and press the “Enter” key.
2 Enter numerical value and press the  

“Enter” key.
Display set numerical value (*).

Set according to need. Normally, use with the 
factory default setting.

•

Note

Return to Default Settings 

(ADVANCED[!]Restore Default 

Setting)

Returns all menu setting values to the default 
state.

advanced>!
Restore All Setting to Default(y/n)? y
— User Setting Initialized —

1

2

1 Enter “!” and press the “Enter” key.
2 Enter “y” and press the “Enter” key.

If the values for IP Address, Subnet Mask or 
Gateway of the projector have been returned to 
the default settings via Telnet, the computer 
cannot be connected to the projector 
depending on the computer's network settings.

•

Note

Setting up the Projector Using RS-232C or Telnet

Return to Main Menu 

(ADVANCED[Q]Return to Main 

Menu)

Returns to the main SETUP MENU.

advanced>q
----------------------------SETUP MENU---------------------------
[1]IP Address 

[2]Subnet Mask 

[3]Default Gateway

[4]User Name 

[5]Password

[6]RS-232C Baud Rate  [7]Projector Name  [8]DHCP Client
[A]Advanced Setup 

 

[D]Disconnect All

[V]View All Setting 

[S]Save & Quit 

[Q]Quit Unchanged

setup>

1

1 Enter “q” and press the “Enter” key.

Returns to the SETUP MENU.