Vidikron Vision 20ET ユーザーズマニュアル

Vidikron Owner’s Manual

    

 

Troubleshooting

7.

Insert the new lamp mod-
ule into the projector hori-
zontally until it is securely
in place.

8.

Tighen  the two screws on
the lamp module. 

9.

Put on the lamp shield. 

10. Tighten the three screws on

the lamp shield.

11.

Put on the front lamp cover.

12. Tighten the screw of front

lamp cover.  

13. Turn on the power and go into the 

 menu, select

 item to reset lamp usage counter.

There is no power from power cable.

Plug the power cord into the AC inlet on the rear of this 

unit, and plug the power cord into to the power outlet.

The power switch is not turned on.

Turn on the power switch.

Turned on this unit again while still in the cool-

ing down procedure.

Wait until this unit completes the cooling down proce-

dure.

The front lamp cover is not correctly attached.

Correctly attach the front lamp cover.