Epson EB-1730W ユーザーズマニュアル
List of Functions
60
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items displayed vary depending on the image signal currently
being projected as shown in the following screen shots.
being projected as shown in the following screen shots.
Computer image/Component video
g
Composite video
g
/S-video
g
EasyMP(EB-1735W/1725 only)
Sub Menu
Function
Lamp hours
You can display the cumulative lamp operating time
*
.
When it reaches the lamp warning time, the characters are displayed in yellow.
Source
You can display the input port name for the connected equipment currently being projected.
Input signal
You can display the content of "Input Signal" set in the "Signal" menu according to the "Source".
Resolution
You can display the input resolution.
Video signal
You can display the content of "Video Signal" set in the "Signal" menu.
Refresh Rate
g
You can display the refresh rate.
Sync
g
Info
You can display the image signal information.
This information may be needed if service is required.
This information may be needed if service is required.
Status
This is information about errors that have occurred on the projector.
This information may be needed if service is required.
This information may be needed if service is required.
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", and so on.