Epson EB-1420Wi ユーザーズマニュアル

Sub-menu

Function

User name

Enter a user name to be used for authentication. You can enter up
to 64 single-byte alphanumeric characters.
If you select PEAP-TLS or EAP-TLS, the user name obtained
automatically from the client certificate is displayed. You can
change the user name if the authentication server requires
another user name.
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.

s

If you also need to enter a domain name, add the domain name
before the user name separated by a backslash.

Password

Enter a password to be used for authentication. You can enter up
to 64 single-byte alphanumeric characters. When the password is
entered and Finish is selected, the value is set and displayed as an
asterisk (*).
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.

s

Client Certificate

Displays the Issued to, Issued by, and Validity period
information set in the stored client certificate. It is blank if the
certificate is not set.

Verify Server
Certificate

Set to On to perform verification for the authentication server
certificate. To verify a server certificate, you need to set CA
certificate.

s

CA certificate

Displays the Issued to, Issued by, and Validity period
information set in the stored CA certificate. It is blank if the
certificate is not set.

Sub-menu

Function

Setting RADIUS
Server Name

Set to On to perform authentication of the server name during
server certificate verification. By specifying the server name, you
can reduce the risk of connecting to an invalid authentication
server.

RADIUS Server
Name

Specify the authentication server name.
You can enter up to 32 single-byte alphanumeric characters (^
cannot be used).

Verify Exp. date
of Server Cert.

Set to On to perform verification of the certificate's validity
period during server certificate verification.

Sub-menu

Function

DHCP

You can set whether or not (On/Off) to use DHCP

If this is set to On, you cannot set any more addresses.

IP Address

You can input the IP address

 assigned to the projector.

You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 192.0.2.x, 224.0.0.0 to 255.255.255.255 (where
x is a number from 0 to 255)