Epson EMP-737 ユーザーズマニュアル
30
Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-745/737 only)
User’s Guide
Disconnecting a USB Device from the Projector
After projection has finished, disconnect the USB device from the
projector by following the procedure below.
projector by following the procedure below.
PROCEDURE
Position the cursor with the "EJECT" button on the
CardPlayer screen and press the [Enter] button on
the remote control to close CardPlayer. s"
CardPlayer screen and press the [Enter] button on
the remote control to close CardPlayer. s"
" in the
EasyMP Operation Guide
Disconnect the USB cable or USB storage device
from the projector's [USB TypeA] port.
from the projector's [USB TypeA] port.
1
CAUTION
Make sure you shut down CardPlayer first before disconnecting a
USB cable or a USB storage device from the projector. If you do not
shut down CardPlayer before disconnecting the USB device,
CardPlayer may no longer operate correctly.
USB cable or a USB storage device from the projector. If you do not
shut down CardPlayer before disconnecting the USB device,
CardPlayer may no longer operate correctly.
2
CAUTION
When a USB-compatible hard disk drive is connected, disconnect the
hard disk drive or turn the power for the hard disk drive off before
turning the power for the projector off. If this is not done, it may cause
problems with the projector.
hard disk drive or turn the power for the hard disk drive off before
turning the power for the projector off. If this is not done, it may cause
problems with the projector.