Epson EMP-737 ユーザーズマニュアル
36
Turning the Projector On
User’s Guide
Turning the Power On and Projecting Images
PROCEDURE
Check that the Power indicator has stopped flashing
and is lit orange.
and is lit orange.
Turn the power on for all equipment connected to the
projector.
projector.
For a video source, press the [Play] button at the video source to
start playback if necessary.
start playback if necessary.
Press the [Power] button on either the projector's
control panel or the remote control to turn the
projector's power on.
control panel or the remote control to turn the
projector's power on.
A beep will sound to indicate that the projector is starting up.
The Power indicator starts to flash green as the projector warms
up, and an image begins to appear.
The Power indicator starts to flash green as the projector warms
up, and an image begins to appear.
TIP
The Password Protect setting may cause the password entry screen to
be displayed each time the power is turned on.
If this happens, enter the password. s
be displayed each time the power is turned on.
If this happens, enter the password. s
1
Lit orange
2
3
Remote control
Changes from flashing to lit green
TIP
If the Power indicator is flashing green, operation of the [Power]
buttons is disabled.
buttons is disabled.