Epson EMP-TW680 ユーザーズマニュアル
7
Part Names and Functions
Remote control
•
Remote control light-
emitting area
emitting area
Outputs remote control signals.
•
On/Off buttons
Turns the projector power on/off.
•
Indicator
Illuminates when remote control
signals are being output.
signals are being output.
•
Memory button
Retrieves stored memories.
•
Menu button
Displays the full-screen
configuration menus.
configuration menus.
•
Select/Line menu button
Displays the line menu.
When viewing a menu, press this
button to select the menu item and
proceed to the next display.
When viewing a menu, press this
button to select the menu item and
proceed to the next display.
•
button
Press to select menu items and
adjustment values and to adjust the
zoom and focus.
adjustment values and to adjust the
zoom and focus.
•
Gamma button
Adjusts the gamma values.
•
Color Temp. button
Adjusts the absolute colour
temperature.
temperature.
•
Contrast button
Adjusts contrast .
•
S.Tone (Skin Tone)
button
button
Adjusts the skin tones of people
who appear in the images.
who appear in the images.
•
Blank button
The projected images switch off
and on each time this button is
pressed.
and on each time this button is
pressed.
•
(Illumination) button
All buttons on the remote control illuminate when this button is pressed.
The button illumination switches off automatically after about 10 seconds
have passed.
The button illumination switches off automatically after about 10 seconds
have passed.
•
Color Mode button
Selects the colour mode.
•
Aspect button
Selects the aspect.
•
Esc button
Pressing [Esc] while viewing a
menu displays the previous menu.
menu displays the previous menu.
•
HDMI button
•
InputB button
•
S-Video button
•
Video button
Changes to the image from the
projector's selected port.
projector's selected port.
•
D4/scart button
•
InputA button
Changes to the image from the
projector's selected port.
You can select the input signal to
match the equipment that is
connected to the selected port.
projector's selected port.
You can select the input signal to
match the equipment that is
connected to the selected port.
Source buttons
•
Pattern button
Selects a test pattern.