Epson EB-Z8000WU ユーザーズマニュアル

ページ / 107
q
• If  Password  Protect  is  already  activated,  you  must  enter  the
Password.
If  the  Password  is  entered  correctly,  the  Password  Protect  setting
menu  is  displayed.  s  
• When  the  Password  is  set,  stick  the  Password  protect  sticker  in  a
visible  position  on  the  projector  as  a  further  theft  deterrent.
B
Turn  on  Power  On  Protect.
(1)
Select Power On Protect, and then press the [Enter] button.
(2)
Select On, and then press the [Enter] button.
(3)
Press the [ESC] button.
C
Turn   on   User's   Logo   Protect.
(1)
Select User's Logo Protect, and then press the [Enter] button.
(2)
Select On, and then press the [Enter] button.
(3)
Press the [ESC] button.
D
Turn  on  Network  Protect.
(1)
Select Network Protect, and then press the [Enter] button.
(2)
Select On, and then press the [Enter] button.
(3)
Press the [ESC] button.
E
Set  the  Password.
(1)
Select Password, and then press the [Enter] button.
(2)
The message "Change the password?" is displayed, select Yes and then
press the [Enter] button. The default setting for the Password is "0000".
Change this to your own desired Password. If you select No, the screen
shown in step 1 is displayed again.
(3)
While holding down the [Num] button, enter a four digit number using
the numeric buttons. The number entered is displayed as "* * * *". When
you enter the fourth digit, the confirmation screen is displayed.
Remote Control
(4)
Re-enter the Password.
The message "Password accepted." is displayed.
If you enter the Password incorrectly, a message is displayed prompting
you to re-enter the password.
Entering  the  Password
When  the  Password  entry  screen  is  displayed,  enter  the  Password  using
the  numeric  buttons  on  the  Remote  Control.
Procedure
While  holding  down  the  [Num]  button,  enter  the  Password  by
pressing  the  numeric  buttons.
When  you  enter  the  correct  Password,  projection  begins.
Security Functions
35