Epson EB-X92 ユーザーズマニュアル

Sub Menu

Function

Auto Iris

(This item can be selected only if Dynamic or Theatre is selected as the Color Mode from the Image menu.)
Set whether or not (On/Off) to adjust to the optimum light status for images being projected. s 

Reset

You can reset all adjustment values for the Image menu functions to their default settings. To return all menu items to their default settings, see s

Items  that  can  be  set  vary  depending  on  the  Source  currently  being  projected  as  shown  in  the  following  screen  shots.  Setting  details  are  saved  for  each  Source
and  its  signal  status.  You  cannot  make  settings  on  the  Signal  menu  when  the  source  is  USB  Display/USB

*

3

.

Computer

*1

Computer

*2

S-Video/Video

HDMI

*3

*

1 When  an  RGB  signal  is  input

*

2 When  a  Component  Video  signal  is  input

*

3 EB-W10/X10  only

Sub Menu

Function

Auto Setup

You can select whether or not (On/Off) Auto Setup automatically adjusts the image to the optimum state when the Input Signal changes.

Resolution

When set to Auto, the resolution of the input signal is automatically identified. If the images cannot be projected correctly when set to Auto, such as
when some of the image is missing, adjust to Wide depending on the connected computer for wide screens, or set to Normal for 4:3 or 5:4 screens.

Tracking

You can adjust computer images when vertical stripes appear in the images.

Sync.

You can adjust computer images when flickering, fuzziness, or interference appear in the images.

Position

You can adjust the display Position up, down, left, and right when a part of the image is missing so that the whole image is projected.