Epson EB-X92 ユーザーズマニュアル

The projector supports the following four different projection methods.
Install according to the conditions of the installation location.

Warning

•

A  special  method  of  installation  is  required  when  suspending  the  projector  from
a  ceiling  (ceiling  mount).  If  it  is  not  installed  correctly,  it  could  fall  causing  an
accident  and  injury.

•

If  you  use  adhesives  on  the  Ceiling  mount  fixing  points  to  prevent  the  screws
from  loosening,  or  if  you  use  things  such  as  lubricants  or  oils  on  the  projector,
the  projector  case  may  crack  causing  it  to  fall  from  its  ceiling  mount.  This
could  cause  serious  injury  to  anyone  under  the  ceiling  mount  and  could
damage  the  projector.
When  installing  or  adjusting  the  Ceiling  mount,  do  not  use  adhesives  to
prevent  the  screws  from  loosening  and  do  not  use  oils  or  lubricants  and  so
on.

Attention

Do not use the projector on its side. This may cause malfunctions to occur.

• Project images from in front of

the screen. (Front projection)

• Project images from behind a

translucent screen. (Rear projec‐
tion)

• Suspend the projector from the

ceiling and project images from

• Suspend the projector from the

ceiling and project images from

in front of the screen. (Front/
Ceiling projection)

behind a translucent screen.
(Rear/Ceiling projection)

• An optional Ceiling mount is required when suspending the

projector from a ceiling.
s

p.80

• You can change the setting as follows by pressing down the [A/V

Mute] button on the Remote Control for about five seconds.
FrontWFront/Ceiling
Set Rear or Rear/Ceiling from the Configuration Menu. s

p.53

Installation Methods