EIKI LC-SXIUL ユーザーズマニュアル

 

 

Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other A’.~ 

equipment. Connect video output from AV equipment to these jacks using the BNC cables. 

 

The video input can be connected 3 types of signals; “COMPOSITE VIDEO”, Y/C SEPARATE VIDEO’ and 

COMPONENT VIDEO {Y, Cb (B-Y), Cr (R-Y)}. 

Set VIDEO SOURCE of each video input (VIDEO IN-i or VIDEO IN-2) to input video matter. (Refer to VIDEO 

SOURCE SELECT” operation on page 37). 

 

CONNECTING S-VHS VIDEO INPUT JACKS (1 and 2) 

The Video input includes an extra video input jack marked S-VIDEO to allow connection to an S-VHS format VCR that 

has separate Y/C video signals.  The S-VIDEO jack has priority over the VIDEO jack. 

  

CONNECTING TO THE AUDIO INPUT JACKS (1 and 2) 

Connect to the audio outputs of a VCR, video disc player, 

olayer. video camera, satellite TV tuner or other A~ 

equipment. Use RCA type audio cable for connection. 

 

•  If the audio signal from the AV equipment is stereo, be sure to connect the right and left channels to the respective 

righi and left audio input jacks. 

 

•  If the external audio signal is monaural, connect it to the left jack. 

 

CONNECTING TO THE VIDEO MONITOR OUTPUT JACKS (BNC TYPE x 3)’ 

These jacks Will contain the video information of the selected program source being v~ewed on the screen (Video 1 

or Video 2). If you have selected program source Video 2 the video signal connected to the Video 2 video input jack 

will be available at the video monitor output jacks. If you select program source Computer 1 or Computer 2, the video 

signal connected to the Video 1 video input jack will be available at the video monitor output jack. 

5. 

Use BNC cable for connection. 

 

CONNECTING TO THE S-VHS VIDEO MONITOR OUTPUT JACK 

The Video monitor output includes an extra video 

input 

jack marKed S-V!DF_O to allow connection to an S-VHS format 

VCR that has separate Y/C video signals. The S-VIDEO jack has priority over the VIDEO jack. 

 

CONNECTING TO THE AUDIO MONITOR OUTPUT JACKS 

These jacks Will contain the audio information o~ The selected program source being viewed on the screen (Video 1 
or Video 2). If you have selected program source Video 2 the audio signal connected to the Video 2 audio input jack 
will be available at the audio monitor output jacks. If you select program source Computer i or Computer 2, the audio 
signal connected to the Video 1 audio input jack will be available at the audio monitor output jacks. 

 

Use RCA type audio cable for connection. 

 

•  If the audio input of the audio equipment is stereo, be sure to connect the right and left channels to the respective 

right and left jacks. 

•  If the audio input of the audio equipment is monaural, connect it to the left jack.