JVC 0809TTH-AO-AO ユーザーズマニュアル

ENGLISH

57

  Mounting this Unit

Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident 

prevention during emergencies including earthquakes.

When mounting this unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and use all the 4 

screw holes (M5 screws) to mount.

SYNC

●

 

Special expertise and techniques are required for mounting

      this unit. Be sure to ask your dealer or a specialist to 

      perform mounting.

●

 

Depth of the screw holes (screw length) is 23 mm. Use

      screws shorter than 23 mm but longer than 13 mm.

      Using other screws will result in 

    malfunctioning or cause the unit to drop.

●

 

When mounting to a pedestal, ensure sufficient space 

      (foot height of 10 mm or higher) around the unit so that 
      the air inlets are not blocked.

●

 

Do not tilt this unit more than ±5 degrees from side to 

      side when using.

●

 

Regardless whether the unit is still under guarantee,

     JVC is not liable for any product damage caused by 

     mounting the unit with non-JVC ceiling fittings or when 

     the environment is not suitable for ceiling-mount.

●

 

When using the unit hanging from a ceiling, pay 

    attention to the surrounding temperature. When a 

    heater is in use, temperature around the ceiling is 

    higher than expected.

Ceiling

■ 

4 locations

Air inlets

Air inlets