Infocus IN134UST ユーザーズマニュアル

Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Installation II 
menu. Press the ▲▼ buttons to move up and down in the Installation II menu.  

 

Auto Source 

Press the ◄► buttons to enable or disable automatic source detection. 

Auto Power Off 
(min.) 

Press the ◄► buttons to enable or disable automatic shutdown of lamp when there is 
no signal.  

Auto Power On 

Press the ◄► buttons to enable or disable automatic power On when AC power is 
supplied. 

Fan Speed 

Press the ◄► buttons to toggle between Normal and High fan speeds.  
Note: It is recommended that the Fan Speed be set to high speed when the altitude of 
the environment is higher than 1500m (4021 ft). 

Lamp Mode 

Press the ◄► buttons to select the lamp mode for higher brightness or lower 
brightness to save lamp life. 

Advanced 

Press 

 (Enter) / ► to enter the Advanced menu. See Advanced Feature on page 

Factory Reset 

Press 

 (Enter) / ► to reset all items to factory preset values. 

Status 

Press 

 (Enter) / ► to enter the Status menu. See page 38 for more information on 

Status. 

 

– 29 –