HP (Hewlett-Packard) L1619A ユーザーズマニュアル

6. For an Ad Hoc connection, set the following properties:

■

Set the Authentication Mode to Ad Hoc.

■

Match the Desired SSID and WEP Encryption to the settings on the projector.

■

If a channel setting is available, set the channel to Auto.

For an Infrastructure connection, set the following properties:

■

Set the Authentication Mode to Infrastructure.

■

Match the Desired SSID and WEP Encryption to the access point settings as 
specified by the network administrator.

■

If a channel setting is available, set the channel to Auto.

7. Click OK.

8. Right-click Wireless Network Connection again, and click Properties.

9. Double-click TCP/IP. For each type of connection, use the following values:

■

For an Ad Hoc connection, set the following properties:

❏

Select Obtain an auto IP address.

❏

Select Obtain DNS server address automatically.

■

For an Infrastructure connection, check with your system administrator 
to obtain the correct settings.

This section describes how to show presentations on a computer.

■

■

■

■