HP (Hewlett-Packard) L1619A ユーザーズマニュアル
User’s Guide
49
Maintaining the System
To manage the projector from the Web
When the projector is connected to a network, you can access the projector’s
embedded Web server. You can check the projector’s current status, change
its configuration, and upgrade firmware. You can do this from a remote location—you
do not have to be in the same room as the projector
embedded Web server. You can check the projector’s current status, change
its configuration, and upgrade firmware. You can do this from a remote location—you
do not have to be in the same room as the projector
The Web interface supports Microsoft Windows 2000 and XP, Mac OS 9 and 10,
Internet Explorer 5.5 and above, and Netscape Navigator 7.0 and above.
Internet Explorer 5.5 and above, and Netscape Navigator 7.0 and above.
1. On a networked computer, open an Internet Explorer or Netscape Navigator, enter
the IP address of the projector in the URL bar, and press the Enter key. See “To
find the projector’s address” on page 47 for more information.
find the projector’s address” on page 47 for more information.
2. Depending on the property you want to view or change, go to the location
indicated in the following table.
3. Make any necessary changes and click Apply.
Managing projector properties
Home tab
Device Info
Shows projector and module information.
Select Language
Selects the language for these Web pages.
Projector tab
Quick Choice
Changes settings that are frequently used.
Input
Selects the input source to display.
Adjust Picture
Changes the appearance of the image.
Audio
Controls the sound output of the projector.
Setup
Sets the configuration of the projector.
Networking tab
Wireless Presenter
Sets the projector name and optional password for
connections from Wireless Presenter-to-Go.
connections from Wireless Presenter-to-Go.