Infocus IN3902LB ユーザーズマニュアル
48
4
Loosen the captive screws that attach the lamp housing to the projector.
Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
5
Install the new lamp module and tighten the screws.
6
Replace the lamp door by sliding it into place and tightening both
screws.
screws.
7
Plug in the power cord and press the Power button to turn the projector
back on.
back on.
8
To reset the lamp hour timer, navigate to the Status and Service menu and
select Reset Lamp Hours (on page 37).
select Reset Lamp Hours (on page 37).
Using the security lock
The projector has a security lock for use with a Cable Lock System. Refer to
the information that came with the lock for instructions on how to use it.
loosen screw
security lock