Infocus IN3128HD ユーザーズマニュアル

iii. The Crestron (eControl) page displays the Crestron eControl user interface. 

See page 31 for details.

To access the Admin page, enter the password. The default password is 
“admin”. If you forget the password, please go to Advanced Menu > Setup > 
Network > Network Restart to restore the password to the default code.

•

System Status: Displays the system information.

•

General Setup: Allows you to turn on/off the projector, switch the input 
signal for the projector, and change the password for the Administrator page.

•

Picture Setup/Image Setup: Provides some OSD menu items for adjusting 
the projected pictures. See page 24

 

for details.

•

Alert Setup/Mail Setup: Allows you to setup the mail server and send 
system error messages to your network administrator.

•

Network Setup: Provides wired and wireless network settings.

•

Reset to Default: Allows you to restore the device to the factory default 
settings.

The Crestron e-Control

 page provides a variety of virtual keys to control the 

projector or adjust the projector’s image. 

You can press </> 
to reveal more 
buttons.

i.

These buttons function the same as the OSD menus and remote control func-
tions. 

•

Source List: To switch the source, click on the desired source. 

•

Menu: Use to go back to the previous OSD menu, exit and save menu 
settings. 

•

When you use the projector control panel or remote control to change the 
OSD menu settings, it may take a while for the web browser to synchronize 
these changes with the projector.

The Tools page allows you to manage the projector, configure the LAN control 
settings and remotely access the network operations of this projector.