Infocus IN5132 ユーザーズマニュアル

18

  Press the ◄ button to return to the previous menu, or press the ► button to 

save the setting. (

19) 

 • <Only for 

IN5135 and IN5145> When the projectors are in the PbyP 

mode, the SUB INPUT SOURCE is set to FOLLOW MAIN UNIT.
• If FIXED (COMPUTER IN 1) is selected, either the 

COMPUTER IN1 or IN2 

port can be selected as an input source on the Main projector. When any 

source button on the remote control or the 

INPUT button on the projector is 

pressed, the MAIN INPUT SOURCE dialog will be displayed on screen. Select 

COMPUTER IN 1 or COMPUTER IN 2 with the ▲/▼ buttons. 
 • If FIXED (COMPUTER IN 1) is selected, the 

COMPUTER IN1 port on the Sub 

projector should be connected to the 

MONITOR OUT port on the Main projector 

with a computer cable. The image from the selected port is output from the 

MONITOR OUT port on the Main projector to the COMPUTER IN1 port on the 

Sub projector. The MONITOR OUT setting on the Main projector is disabled 

when FIXED (COMPUTER IN 1) is selected. (

 → 

) 

• If FIXED (COMPUTER IN 1) is selected, video signals can be input to the 

COMPUTER IN1 or IN2 port on the Main projector. Set the port for video signal 

input in the COMPUTER IN menu and set the video format in the VIDEO 

FORMAT menu. Refer to 

(

24) and 

. (

28)

  Highlight SUB INPUT SOURCE in the STACK 

menu with the ▲/▼ buttons, then press the ► 

button to display the SUB INPUT SOURCE dialog.

  Use the ▲/▼ buttons in the dialog to highlight FOLLOW MAIN UNIT or FIXED 

(COMPUTER IN 1). 

FOLLOW MAIN UNIT: Sets the input source on the Sub projector to the same 

port as Main. 

FIXED (COMPUTER IN 1): Sets the input source on the Sub projector to the 

COMPUTER IN1 port which is connected to the MONITOR OUT port on the 

Main projector.