Infocus IN5132 ユーザーズマニュアル

25

If Simple Stack without an RS-232 connection is used, press the related source 

button on the remote control or press the projector's 

INPUT button to select the 

port which has the connected cable. For setting up MONITOR OUT, refer to 

 in 

.

This completes set up.

If Intelligent Stack with the RS-232 connection is used, all settings or modifications 

related to Intelligent Stack menu operations must be completed using the Main 

projector. The Main projector functions according to the Intelligent Stack settings

For Intelligent Stack, all settings or modifications related to menu operations must 

be completed using the Main projector. Before operating the menu for Intelligent 

Stack, check if the Main projector is functioning. 

  Press the 

MENU button on the remote control. 

  If the MENU dialog as shown on the right appears on 

the screen, the two projectors are operating in DUAL 

mode and the Main projector is operating.  

Go to 

. (



27)

 

If the dialog does not appear, LAMP MODE is set to ALTERNATE and either 

the Main or Sub projector is operating. Go to next. 

  Use the ▲/▼/◄/► buttons to go into the following menu. 

ADVANCED MENU > OPTION  

 > SERVICE > COMMUNICATION  

 > STACK
STACK menu will appear on screen. 

(

 → 

)

  Check the STACK MODE setting in the STACK menu. 

-  If MAIN is displayed, the Main projector is operating. Go to 

. (

27) 

-  If SUB is displayed, the Main projector is turned off and the Sub projector is 

operating. Go to 

. (

26)