Infocus IN5135 ユーザーズマニュアル

27

If Intelligent Stack with RS-232 connection is used, observe the following. When 

inputting image signals to Sub via Main, the operations differ between using 

computer signals and video signals such as component and video signals. 

  If the STACK menu is already displayed on the screen, proceed to 3 below. 

Otherwise press the 

MENU button on the remote control.  

If the MENU dialog is displayed, use the ▲/▼ buttons to 

highlight MAIN, and press the ► button. A menu will be 

displayed.  

If the MENU dialog is not displayed, the STACK menu will appear. 

  Use the ▲/▼/◄/► buttons to go into the following menu. 

ADVANCED MENU > OPTION  

 > SERVICE > COMMUNICATION > STACK

STACK menu will appear on screen. 

(

 → 

)

  Use the ▲/▼ buttons to highlight SUB INPUT 

SOURCE, and press the ► button to display the 

SUB INPUT SOURCE dialog.

  Use the ▲/▼ buttons to highlight FIXED (COMPUTER IN 1), and press the ► 

button to save the setting. (

19) 

  Press any source button on the remote control 

or the 

INPUT button of the Main projector. The 

MAIN INPUT SOURCE dialog is displayed on 

screen. Use the ▲/▼ buttons to highlight the port 

to which the signal cable is  

connected, and press the ► button to save the 

setting.

 • When FIXED (COMPUTER IN 1) is selected, the MONITOR OUT 

setting is invalid. (

 → 

) 

• When FIXED (COMPUTER IN 1) is selected, you cannot select any input 

sources besides 

COMPUTER IN1 and COMPUTER IN2. 

• When FIXED (COMPUTER IN 1) is selected and any source button on the 

remote control or the 

INPUT button on the Main projector is pressed, the dialog 

for selecting the input source will be displayed.