Infocus IN76 ユーザーズマニュアル

To adjust the following settings, highlight the setting, press Select, use the 
up and down arrows to adjust the values, then press Select to confirm the 
changes.

: adjusts the image vertically and makes a squarer image. Tilt the 

projector up or down to adjust for keystone before using the digital key-
stone correction in the menu.

: controls the degree of difference between the lightest and darkest 

parts of the picture.

: changes the intensity of the image.

: adjusts a video image from black and white to fully saturated color. 

: adjusts the red-green color balance in the image of NTSC video 

images. The tint setting applies to NTSC video sources only.

: Aspect ratio is the ratio of the image width to image height. 

TV screens are usually 4:3. HDTV and most DVDs are 16:9. The projector’s 
default is 16:9. See “Choosing the aspect ratio” on page 6 for more informa-
tion.

Select Native to see the unmodified input with no resizing by the projector. 
Select 16:9 to watch enhanced widescreen DVDs. Select Letterbox to pre-
serve the 16:9 aspect ratio. If you have a 16:9 source and screen, the image 
fills the screen. If your source is letterboxed, the image is expanded to fill 
the screen. Select Natural Wide to stretch a 4:3 image to fill the entire 16:9 
screen. The center two-thirds of the image is unchanged; the edges of the 
image are stretched.

For more information regarding Aspect Ratio, see page 6.

Picture menu

increasing keystone

decreasing keystone

Aspect ratio