Infocus IN76 ユーザーズマニュアル

: changes the intensity of the colors. Select a value. 

Native means an uncorrected/unchanged color temperature. Other values 
change the white point of the colors. 6500K is generally used for film con-
tent and 9300K is used for TV video.

: allows you to individually adjust the gain and offset of the 

red, green, and blue colors. These advanced controls have the same effect as 
contrast and brightness, but each controls a single color only.

: when it is set to Auto, the projector attempts to automati-

cally pick the video standard based on the input signal it receives. (The 
video standard options may vary depending on your region of the world.) If 
the projector is unable to detect the correct standard, the colors may not 
look right or the image may appear “torn.” If this happens, manually select 
a video standard by selecting NTSC, PAL, or SECAM from the Video Stan-
dard menu.

: removes noise around the edges of the video image. Select Zoom 

to remove the outer 3% of the image and scale the image back up to its orig-
inal size. Select Crop to remove the outer 3% of the image without rescaling 
the image.

: adjusts signal noise reduction. Choose Enable then adjust 

the level. The software determines the differences between successive image 
frames and averages the changes out to reduce the noise.

Color 
Temperature

Color Control

Video Standard

Overscan

Noise Reduction