Infocus IN5318 ユーザーズマニュアル

 

 

– 45 – 

Adjust the Contrast setting in the PICTURE >> Basic menu of the OSD. 

Adjust the Color Temperature and Gamma settings on the PICTURE >> Advanced menu of 
the OSD. 

1.  Check that the power cable is securely connected. 

2.  Ensure the power source is good by testing with another electrical device. 

3.  Restart the projector in the correct order and check that the PWR LED is solid Green. 

4.  If you have replaced the lamp recently, try resetting the lamp connections.  

5.  Replace the lamp module. 

6.  Put the old lamp back in the projector and have the projector serviced. 

1.  Power surges can cause the lamp to turn off. Unplug and re-plug the power cord and 

press the Power button. 

2.  If the lamp still does not ignite, unplug the projector and allow it to cool for 60 minutes. 

Replace the lamp. 

3.  If a new lamp does not resolve the issue, put the old lamp back into the projector and ar-

range to have the projector repaired. 

1.  Direct the remote control towards remote sensor on the projector.  

2.  Ensure the path between remote and sensor is not obstructed. 

3.  Turn off any fluorescent lights in the room. 

4.  Check the battery polarity. 

5.  Replace the batteries. 

6.  Turn off other infrared-enabled devices in the vicinity. 

7.  Replace the remote control.