Infocus IN5855L ユーザーズマニュアル
33
Information Submenu: displays a read-only page of projector information.
To upgrade Projector Network Firmware: Upgrades the firmware for the
projector's network features (this firmware is separate from the regular projector
firmware). Key in the IP address followed by “/firmwareUpdate.htm” on the URL
box to activate the firmware update procedure. Follow the prompts to accomplish
the upgrade.
projector's network features (this firmware is separate from the regular projector
firmware). Key in the IP address followed by “/firmwareUpdate.htm” on the URL
box to activate the firmware update procedure. Follow the prompts to accomplish
the upgrade.
Note: DHCP must be disabled or OFF in order for the "/firmwareUpdate.htm" fea-
ture to work.
Troubleshooting Network Functions
•
If the network status displays “Not Connected” in the projector's Network
menu, or if the projector does not display its IP address, check the cable and
the network configuration.
menu, or if the projector does not display its IP address, check the cable and
the network configuration.
•
If your web browser displays “Page Not Found” or a similar error when you try
to access the projector's web pages, verify that the projector is connected to
the network. Note: Projector Control in the Control menu must be set to
Network.
to access the projector's web pages, verify that the projector is connected to
the network. Note: Projector Control in the Control menu must be set to
Network.
•
Make sure Eco Network Power in the Control menu is set to Standard (if it is
set to Eco, the projector web pages will not be available).
set to Eco, the projector web pages will not be available).