Infocus IN5532 ユーザーズマニュアル

11

Displaying an image

Touch the Power button on the keypad or the remote.
The Power button blinks green, a beep will sound and the fans start to run. 

When the lamp turns on, the start up screen will display and the Power 

button will become solid green. It can take a minute for the image to achieve 

full brightness.

No start up screen?

 Get help on page 16.

Turn on your computer or video device.
The image should appear on the projection screen. If it doesn’t, press the 

Source

 button on the projector’s keypad or remote.

If you are using a VGA cable to connect your computer to the projector 

(instead of DisplayLink):
If using a laptop, make sure its external video port is active.
Many laptops do not automatically turn on their external video port when a 

projector is connected. Usually a key combination like Fn + F8 or CRT/LCD 

key turns the external display on and off. Locate a function key labeled 

CRT/LCD or a function key with a monitor symbol. Press Fn and the 

labeled function key simultaneously. 
Refer to your laptop’s documentation for more information about your 

laptop’s key combination or go to the InFocus website at: 
http://www.infocus.com/Support/LaptopActivation.aspx. 

No laptop image?

 Try pressing the Auto Image button on the keypad or 

remote. Get help on page 25.

Is your laptop connected to the projector's DisplayLink connector?

 See the 

InFocus DisplayLink Software User's Guide (available on the InFocus 

website at www.infocus.com/displaylink) for troubleshooting information.

horizontal

vertic

al

zoom

focus

Press Power button

Turn on computer or 
video device

Activate laptop’s external port

Monitor key or 
LCD/CRT key

Fn key