Infocus IN5532 ユーザーズマニュアル

44

For IN5534 and IN5532 (Dual Lamp)

1

Turn the projector off and unplug the power cord.

2

Wait 60 minutes to allow the projector to cool thoroughly.

3

Remove the lamp door:

(a) release the top latches by sliding the release buttons toward the rear 

of the projector,

(b) slide the top front cover towards the direction of the lens,

(c) remove the 5 screws, then lift the lamp door off.

4

Loosen the 2 captive screws that attach the first lamp housing to the pro-
jector. Carefully remove the lamp housing. Do the same for the second 
lamp housing. Dispose of the lamps in an environmentally proper man-
ner in accordance with local disposal laws.

5

Install the new lamp housings and tighten the 2 screws.

6

Replace the lamp door by securing the 5 screws.

7

Replace the top front cover by sliding it back into place.

8

Plug in the power cord and press the Power button to turn the projector 
back on.

9

To reset the lamp hour timer, navigate to the Status and Service menu and 
select Reset Lamp Hours. See page 33 for details.

NOTE: 

The lamp status indicator will show which lamp needs to be 

replaced. One blink off every 2 seconds indicates lamp #1 (part number SP-

LAMP-055); two blinks off every 2 seconds indicates lamp #2 (part number 

SP-LAMP-056).

Turn off and 
unplug projector

Wait 60 
minutes

 

SP-LAMP-055

SP-LAMP-056

(3a)

(3a)

(3b)

(3c)

(Lamp #1)

(Lamp #2)