Infocus IN2116 ユーザーズマニュアル
23
Using the audio
Using the projector’s speakers
To use the projector’s speaker, connect your source to the Audio In Computer or
Video connectors.
Video connectors.
To adjust the volume, press the Volume buttons on the keypad or remote.
Troubleshooting Audio
If you aren’t hearing the audio, check the following:
If you aren’t hearing the audio, check the following:
•
Make sure the audio cable is connected to the correct audio in connector,
Computer or Video.
Computer or Video.
•
Make sure the volume is turned up enough. Press the Volume button on the
keypad or remote.
keypad or remote.
•
Make sure you are connected to the corresponding audio in for your source.
•
Make sure that you are connected to an audio out connector on the source as
opposed to a line in or microphone connector.
opposed to a line in or microphone connector.
•
Adjust the audio source.
•
If playing a video, make sure the playback has not been paused.
Connecting external speakers
The projector can be attached to external amplified speakers by connecting a 3.5mm
stereo audio cable from the Audio Out connector on the projector to the amplified
speakers. Alternatively, you can bypass the projector’s audio system and connect
the audio directly from your source to a stereo or home theater system.
stereo audio cable from the Audio Out connector on the projector to the amplified
speakers. Alternatively, you can bypass the projector’s audio system and connect
the audio directly from your source to a stereo or home theater system.
Connect audio cable
Adjust volume
External speakers
with own power
source
with own power
source
Speaker
cable
cable